CONNECTING THE PROJECTOR

Connect the composite video output from the video equipment to the to the Y/VIDEO or connect the component video outputs.

,Pb/Cb and Pr/Cr jacks (Refer to P12.)

This projector uses a micro processor to control the unit. Occasionally, the micro processor may malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit.

Connect an external audio amplifier to this terminal.

(Refer to P12, 13.)Connect the computer output to this terminal.

(Refer to P13.)

Connect the S-VIDEO output from the video equipment to this terminal. (Refer to P12.)

Connect the audio output from the video equipment to this terminal. (Refer to P12.)

Connect the audio output from the computer to this terminal. (Refer to P13.)

When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal. (Refer to P13.)

COMPUTER INPUT TERMINAL

Terminal : HDB1 5-PIN

Connect the display output terminal of the computer to

COMPUTER INPUT terminal of this projector with the VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required

.

CONTROL PORT CONNECTOR

Terminal: DIN 8-PIN

Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with the Control Cable (the Control Cable for PS/2 port is supplied).

11

Page 11
Image 11
Eiki LC-SM1 owner manual Connecting the Projector, Computer Input Terminal