PREPARATION
POSITIONING THE PROJECTOR
• This projector is designed to project on a flat | ROOM LIGHT |
projection surface. | The brightness in the room has a great |
• The projector can be focused from 4.6’ (1.4m) 26.3 | influence on the picture quality. It is |
(8.Om). | recommended to limit ambient lighting in |
• Refer to the figure below to adjust the screen slze. | order to provide the best image. |
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 7.6 degrees.
1 Lift the front of the projector and pull the FEET LOCK LATCHES on both sides of the projector.
2 Release the FEET LOCK LATCHES to lock the ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to fine tune the position and the tilt.
3 To shorten the ADJUSTABLE FEET, lift the front of the projector and pull and undo the FEET LOCK LATCHES.
The position and the keystone distortion of the image can be adjusted using the Menu Operation. (Refer to P 20, 28 and 30.)
9
