1
2
Press the MENU button and the
the SELECT button. Another dialog box VIDEO SYSTEM Menu will appear. Press the POINT DOWN button and a
appear. Move the arrow to “Auto”, and then press the SELECT button.
When the Video signal is from the VIDEO or the S-
VIDEO JACK
Auto
The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance. When the Video System is
PAL I SECAM I NTSC I NTSC4.43 I PAL-M I PAL-N
If the projector cannot reproduce the proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43,
When the Video signal is from the Y Pb/Cb, Pr/Cr JACKS
Auto
The projector automatically detects the incoming Video signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce the proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
This projector has a picture screen resize function, which enables you to display the desirable image size.
1Press the MENU button and the
2Press the POINT DOWN button and a
Regular
Normal Video Image size with 4 x 3 aspect ratio.
Wide
Resizes the image for wide screen size with 16 x 9 aspect ratio.
Keystone
When the image is distorted vertically, select Keystone in the dialog box.
Correct the Keystone distortion by pressing KEYSTONE !/" button or
POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20.
30
