Eiki LC-X85 owner manual Rear Terminal

Part Names and Functions

Rear Terminal

q

w

e

r

t

!0

o

i

u

y

qCOMPUTER INPUT TERMINAL (DIGITAL) Connect the computer output digital signal to this terminal. The HDTV (HDCP compatible) signal can also be connected (pp.22-23).

wCOMPUTER INPUT TERMINAL (ANALOG) Connect the computer (or RGB scart) output signal to this terminal (pp.22-23).

e5 BNC INPUT JACKS

Connect the component or composite video output signal from video equipment to VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.22- 23).

rVIDEO INPUT JACK

Connect the component or the composite video output signal from video equipment to this jack (p.23).

tR/C JACK

When using the wired remote control, connect the wired remote control to this jack with a remote control cable.

yUSB CONNECTOR (Series B)

Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.22).

uCONTROL PORT CONNECTOR

When controlling the projector from a computer, connect the computer to this connector with a control cable (p.22).

iAUDIO IN ΙΙ JACK

Connect the audio output (stereo) signal from a computer or video equipment (p.24).

oS-VIDEO INPUT JACK

Connect the S-VIDEO output signal from video equipment to this jack (p.23).

!0AUDIO IN Ι JACK

Connect the audio output (stereo) signal from a computer or video equipment (p.24).

11