Basic Operation
Turning Off the Projector
1 | Press the |
|
|
|
or the |
|
|
| |
| “Power off?” appears on the screen. |
|
|
|
2 | Press the |
|
|
|
|
|
| ||
the |
|
|
| |
| turn off the projector. The LAMP/SHUTTER indicator |
|
|
|
| lights bright and the POWER indicator turns off. After |
|
|
|
|
|
|
| |
| the projector is turned off, the cooling fans operate for | “Power off?” disappears after 4 seconds. | ||
| 90 seconds. You cannot turn on the projector during this |
|
|
|
| cooling down period. |
|
|
|
3 | When the projector has cooled down enough, the |
|
|
|
POWER indicator lights green and then you can turn on |
|
|
| |
the projector. To unplug the AC power cord, wait until the projector is completely cooled down.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
POWER INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY
WITHOUT REST. CONTINUOUS USE MAY RESULT
IN SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN HOUR
IN EVERY 24 HOURS.
✔Note:
•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.56).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNINGTEMP. indicator blinks red, see “Warning Indicators” on page 68.
•The projector cannot be turned on during the cooling period with the POWER indicator turned off.You can turn it on again after the POWER indicator becomes green again.
27
