30
Operating with Projector Control
The following lens operation can be made with the Lens
button on the side control.
Press the LENS button to enter each lens operation mode.
The selected adjustment display appears on the screen.
Display “Lens shift” on the screen. Use the Point ed7 8
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 50 percent, or
sideways up to 10 percent from the central axis of the
lens shift.

Lens Shift Adjustment

✔Note:
 •Thearrowdisappears atthemaximum lensshift
ineachdirection.
 •Thearrowturnsredwhenthelens shiftcomesto
thecenterpositionofthescreen.
Display “Zoom” on the screen. Use the Point ed buttons
to zoom in and out the image.

Zoom Adjustment

Display “Focus” on the screen. Use the Point ed buttons
to adjust focus of the image.

Focus Adjustment

Side Control
LENS button

Lens Operation

ZOOM
FOCUS
POINT buttons
Zoom ➜ Focus ➜ Lens Shift ➜ • • • • •
Basic Operation

Shutter Function

Shutter function allows you to completely block out light
to the screen. Press the SHUTTER button to close the
shutter inside the projector. To open up the shutter, press
the SHUTTER button again. Refer to p.59 for detail of
setting for the Shutter function.
✔Note:
���TheSHUTTERbutton on the side control and the
remotecontrol cannot be effective when Shutter
Protectionis"On"intheSettingmenu.(p.59)
•TheLAMP/SHUTTERindicatorontheprojector'stop
lightsbluewhentheshutterisclosed.(p.13)
•Theprojectorwill shut down automatically when
theset time on shutter management has passed.
(p.59)
•ThePowermanagementfunction does not work
whentheshutterisclosed.(p.56)
SHUTTER button