Eiki LC-XB42N owner manual Basic Operation, NO SHOW button, P-TIMER button, IMAGE button

Basic Operation

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (p.49), the screen changes each time you press the NO SHOW button as follows.

black out  the captured image  normal  • • • • •

P-TIMER button

Press the P-TIMER button on the remote control. The P-Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59).

To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.

“No show” disappears after 4 seconds.

P-Timer display

IMAGE button

Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 36, 43 for details.

NO SHOW button

P-TIMER button

IMAGE button

Note:

• See the previous page for the description of other buttons.

29