Eiki LC-XB42N owner manual Video Input, Input Source Selection Video, S-video, Direct Operation

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

Top Control	INPUT button
	INPUT button
	Computer 1 (Analog)
	Computer 1 (Digital)
	Computer 2
	Video
	Wired
	Wireless
Remote Control
	VIDEO button

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄► buttons to move the red
	frame pointer to the Input Menu icon.
2	Use the Point ▲▼ buttons to move the red arrow
	pointer to Video and then press the SELECT button to
	display the Source Select Menu.
3	Move the pointer to the desired source and then press
	the SELECT button.
		When selecting Auto, the projector automatically
	Auto
		detects incoming video signal, and adjusts
		itself to optimize its performance. The projector
		selects connection in the following order:
		1. S-video
		2. Video
		When video input signal is connected to the
Video
		VIDEO jack, select Video.
		When video input signal is connected to the S-
S-video
		VIDEO jack, select S-video.

Notes:

•Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).

Input Menu

VIDEO

Input Menu icon

Move the pointer to

Video and press the

SELECT button.

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

40