Eiki LC-XB42N owner manual Top Control, Part Names and Functions

Part Names and Functions

Top Control

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

①LAMP REPLACE indicator

Lights yellow when the projection lamp reaches its end of life (pp.61, 69).

②ON/STAND–BY button

Turn the projector on or off (pp.22–23).

③INPUT button

Select an input source (pp.30–31, 40–41).

④KEYSTONE button

Correct keystone distortion (pp.26, 48).

⑤POINT▲▼◄► (VOLUME +/–) buttons

–Select an item or adjust the value in the On-Screen Menu (p.24).

–Pan the image in the Digital zoom + mode (p.39).

–Adjust the volume level (Point ◄► buttons) (p.27).

⑥SELECT button

–Execute the selected item (p.24).

–Expand or compress the image in the Digital zoom mode (p.39).

⑦WARNING indicator

–Lights red when the projector detects an abnormal condition.

–Blinks red when the internal temperature of the projector exceeds the operating range (pp.58, 69).

⑧POWER indicator

–Lights red when the projector is in stand-by mode.

–Lights green during operations.

–Blinks green in the Power management mode (p.52).

⑨AUTO SETUP/CANCEL button

–Correct vertical keystone distortion and adjust computer display parameters such as Fine sync., Total dots, and Picture position (pp.26, 47).

–Display the image in SD card or return to the menu bar in Memory Viewer menu.

Refer to the owner's manual of "Network Set-up and Operation".

⑩MENU button

Open or close the On-Screen Menu (p.24).

12