Eiki LC-XB42N Input Source Selection Component, RGB Scart 21-pin, Video Input, Direct Operation

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation Top Control

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Video Input

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video wired wireless

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ◄►buttons to move the red frame
	pointer to the Input Menu icon.
2	Use the Point ▲▼ buttons to move the red arrow
	pointer to Computer 2 and then press the SELECT

button.

After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button.

Component	When the input source is coming from video
	equipment connected to the COMPUTER
	IN 2/COMPONENT IN terminal with a
	Component-VGA Cable, select Component.

Remote Control

COMPUTER button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Input Menu Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

RGB (Scart)

Note:

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

Computer

2

Source Select Menu

Move the pointer to Component or RGB(Scart) and press the SELECT button.

•Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).

41