Y/KSCF/C/HC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS

CHAPTER 2: IMPORTANT INFORMATION

2.6 Air Supply and Ventilation

DANGER

Do not connect this appliance to the gas supply before reviewing each step in this

section.

A.Keep the area around the fryer clear to prevent obstruction of combustion and ventilation airflow and to allow for service and maintenance. Always adhere to the following:

1.Do not connect this fryer to an exhaust duct.

2.Follow installation and adjustment procedure to ensure adequate airflow to the fryer system.

3.A heavy-duty, commercial fryer’s combustion wastes must vent to the outside of the building. A deep-fat fryer must be installed under a powered exhaust hood, or an exhaust fan must be provided in the wall above the unit. Exhaust gas temperatures are approximately 800-1000°F (427-538°C). Check air movement during installation. Strong exhaust fans in the exhaust hood or in the overall air conditioning system can produce slight air drafts in the room and cause erratic burner flames or improper fryer operation.

4.Do not place the fryer’s flue outlet directly into the plenum of the hood, as it will affect the gas combustion of the fryer.

5.Never use the interior of the fryer cabinet for storage or store items on shelving over or behind the fryer. Exhaust temperatures can exceed 800°F (427ºC) and may damage or melt items stored in or near the fryer.

6.Adequate distance must be maintained from the flue outlet of the fryer(s) to the lower edge of the filter bank. Per NFPA Standards No. 96, a minimum of 18-inches (45-cm) should be maintained between the flue(s) and the lower edge of the exhaust hood filter.

7.Filters and drip troughs should be part of an industrial hood, but consult local codes before constructing and installing any hood. The duct system, the exhaust hood, and the filter bank must be cleaned on a regular basis and kept free of grease.

2.7Equipment Installed at High Altitudes

A.The fryer input rating [BTU/hr (kW/hr)] is for elevations up to 2,000 feet (610 m). For elevations above 2,000 feet (610 m), the rating should be reduced 4% for each additional 1,000 feet (305 m) above sea level.

B.The correct orifices are installed at the factory if operating altitude is known at time of the customer’s order.

2-4

Page 10 Page 12
Page 11
Image 11
Frymaster Y/KSCF/C/HC18G operation manual Air Supply and Ventilation, Equipment Installed at High Altitudes
Page 10 Page 12

Y/KSCF/C/HC18G specifications

The Frymaster Y/KSCF/C/HC18G is a modern deep fryer designed for high volume cooking, particularly suited for the fast-paced demands of commercial kitchens. With its robust engineering and innovative technologies, this fryer delivers exceptional performance, ensuring efficiency and consistency in food quality.

One of the standout features of the Frymaster Y/KSCF/C/HC18G is its high-capacity frying capability. Designed to accommodate large batches, it can hold significant amounts of oil, allowing for the frying of various foods simultaneously, thus optimizing cooking times. This fryer is ideal for establishments that requires consistent output, such as restaurants, cafeterias, and food trucks.

The Y/KSCF/C/HC18G incorporates advanced oil filtration technology, which is crucial for maintaining the quality of the frying oil over extended periods. This system automatically filters oil during idle times and prior to cooking cycles, removing food particles and prolonging the life of the oil, ultimately leading to cost savings for businesses. The filtration process also contributes to better-tasting foods by reducing the build-up of unwanted residues.

Another innovative characteristic of this fryer is its precise temperature control. The Frymaster Y/KSCF/C/HC18G utilizes a digital control system that allows operators to set and monitor cooking temperatures accurately. This feature helps achieve optimal frying conditions for different food types, ensuring that items are cooked evenly and to the desired crispness.

Energy efficiency is another important aspect of the Frymaster Y/KSCF/C/HC18G. Equipped with high-performing heating elements, this fryer heats up quickly and maintains temperature consistently, reducing energy consumption. Features such as programmable cook times and automatic shut-off further enhance energy efficiency, contributing to lower operational costs.

Safety is paramount in commercial kitchens, and the Frymaster Y/KSCF/C/HC18G is designed with multiple safety features. It includes an automatic safety shut-off system that activates if the fryer reaches dangerously high temperatures, thereby preventing overheating and potential hazards.

In summary, the Frymaster Y/KSCF/C/HC18G is an outstanding deep fryer that combines high capacity, efficient oil filtration, precise controls, energy-saving features, and robust safety mechanisms. It is an ideal choice for operators seeking reliability and excellence in their frying operations, ensuring that they can meet customer demands without compromising on quality.
Top Page Image Contents