Frymaster Y/KSCF/C/HC18G Filtering, Closing, fryer only, See for detailed filtration procedures

Y/KSCF/C/HC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS

CHAPTER 4: DAILY OPERATION

4.3 Filtering

DANGER

When filtering, never leave the filter unattended. The filtered oil is at or near 350°F (177°C). Ensure all hoses are connected properly and drain handles are in their proper position prior to operating any switches or valves.

DANGER

The crumb tray in fryers equipped with a filter system must be emptied into a

fireproof container at the end of frying operations each day. Some food particles can

spontaneously combust if left soaking in certain shortening material.

WARNING

Filter one frypot at a time. The filter pan is designed to safely hold the oil from one

fryer only.

1.The KFC-1 Controller must remain ON during filter operations for proper filter function.

NOTE: For FAST-equippedfryers, see the Fast manual for operation instructions.

2.Filter the shortening at least once daily or more frequently if cooking is heavy. This assures the longest life possible for the shortening, a better taste to the food being prepared, and minimizes flavors being transferred from batch to batch.

3.If using solid shortening, clear return lines before turning off the filter motor by allowing the pump to run for approximately 15-30 seconds once air bubbles appear in the frypot from the oil return line. Failure to do so increases the likelihood that solid shortening will solidify and clog the lines.

NOTE: If using over-the-top oil return, allow the faucet to sputter for 15-30 seconds.

See Chapter 5 for detailed filtration procedures.

4.4Closing

1.When closing at night, filter shortening in all fryers and drain the filter lines. Cover the open tanks of oil. Turn the controller OFF.

2.When shutting down for periods longer than overnight, drain shortening and clean the frypot thoroughly. After cleaning, discard the shortening or filter it and return it to the frypot. Cover the frypot with the appropriate frypot cover. Turn both the power switch and controller OFF.

4-3