Manuals / Brands / Computer Equipment / Computer Monitor / Eizo / Computer Equipment / Computer Monitor

Eizo 630LT-GR-N NOTE, 4. Click [Download], •In case of updating the built-insoftware, •In case of installing or updating the Add-onsoftware

1 68

Download 68 pages, 1.53 Mb

3. Preventing from update failure, check if the settings are correct and the network environment is suitable. Click [Network Test].

If the settings are correct, the following message is displayed.

Click [OK].

4. Click [Download].•In case of updating the built-in software

The following message is displayed when you successfully download the software.

Click [OK] and restart the eClient 630LT-GR/630LT-GR-N.

•In case of installing or updating the Add-on software

The eClient restarts automatically when you successfully download the software.

NOTE

•Failing to download results in program’s returning to the “Software Update” dialog box.

-In case of returning to the “Software Update” dialog box, confirm such as network settings and redo the [Settings] before clicking [Download].

-In case of retry dialog box is displayed, confirm connection or network settings by following the message, and click [Retry]. If the setting still fails, click [Cancel] to automatically restore the original software and restart the unit. After the unit restarts and resets the update settings. Set the “Software Update” settings once again and download the software from the FTP Server. Do not turn off the unit when this dialog box is displayed until all the process is completed. The eClient 630LT-GR/630LT-GR-N will not restart correctly.

54 7. SOFTWARE UPDATING/INSTALLATION

Contents

- For Administrator User’s Manual Version List WARNING CAUTION TABLE OF CONTENTS 1. INTRODUCTION 1-1.General Description 1-2.Features 1-3.Package Contents 1-4.Controls & Connectors Page 2.CONNECTING THE eClient 630LT-GR/630LT-GR-N 2-1.Setting up the eClient 630LT-GR/630LT-GR-N 2-2.Connecting the eClient 630LT-GR/630LT-GR-N 1. In case of connecting the WTS through LAN: Connect the eClient 630LT-GR/630LT-GR-Nto the network with an Ethernet cable In case of a dial-upor dial-inconnection: Connect the eClient 630LT-GR/630LT-GR-Nto a modem or a modem card Plug a keyboard and a mouse into the eClient 3.SETTING UP the eClient 630LT-GR/630LT-GR-N 3. “Calibration measured” window is displayed when you finished 4. “eClient Setup Wizard” is displayed 5. End User License Agreement page is displayed 6. Set up the network environment Connection method In case of connecting the WTS/Web through Built-inLAN: In case of connecting with a NE2000 compatible LAN card: In case of connecting with a Cisco wireless LAN card/Agere wireless LAN card: In case of a dial-upconnection: 7. Set up the desktop area 8. Set up the browser connection (1) Select [Internet Options] icon and click [Open] 9. Set up the printer (1)Select [Printer] icon and click [Open] icon (2)Select [Add printer] icon and click [Open] icon 10. Setup the Local sender’s setting (1) Select [Dialing] icon and click [Open] icon 11. The last page of the “eClient Setup Wizard” is displayed 4.ADDING & CHANGING A CONNETION NAME 4-1.Adding a Connection Name 1. Display [Terminal Connection Manager] 2. Protocol selection dialog box is displayed 3. “WTS Connection Wizard” is displayed. (Setup as following the wizard.) (1)Type the connection name and the name of the Server (2)Setup to enable an Automatic Logon to the WTS after connecting if you want 2. “New Connection” dialog box is displayed on the screen 3. “Specify Connection Type” is displayed. (Setup as following the wizard.) Choose a connection type (Network Connection (2)Setup a server or modem according to a connection type (3)Type a connection name of the WTS 4-2.Setting an Autostart Connection 4-3.Modifying a Connection Name 5. LOGON & LOGOFF 5-1.Logon to a WTS / Logoff from a WTS Multi Session Logon with a Connection Name, as following the previous steps Press [Ctrl] + [Alt] + [End] keys after logon Switching the Active Session of the WTS If your eClient 630LT-GR/630LT-GR-Nstarts its operation with a desktop 1. Logoff from the WTS (1)Close all applications (2)Select [Start] on the taskbar (3)Microsoft Windows NT Server 4.0 Terminal Server Edition: Select [Logoff] If your eClient 630LT-GR/630LT-GR-Nstarts its operation with an application 1. Log off from the WTS 2. Shut down the eClient 630LT-GR/630LT-GR-N 5-2.Opening/Closing a Local Web Browser 1. Close the local web browser 6.USING THE TERMINAL PROPERTIES Tab name Contents Remarks Refer 6-1.General 6-2.Local Resources (RDP protocol only) 6-3.Display Page 6-4.Experience (RDP protocol only) 6-5.Control Panel Page Page [Double-clickspeed] [Double-clickwidth and height] Page Page Page Adding another printer settings Deleting a printer settings Modifying the settings Page 6-6.ICA Settings (ICA Protocol only) 6-7.Server 6-8.Security (1)Display the “Single Button Connect” dialog box (2)Press [Alt] and [F4] keys at the same time (4)“Terminal Connection Manager” is displayed 6-9.System 7.SOFTWARE UPDATING/INSTALLATION (Built-inSoftware) 1. Click the [Update...] of [System] tab 2. “Software Update” dialog box is displayed 4. Click [Download] •In case of updating the built-insoftware •In case of installing or updating the Add-onsoftware 1. Update a 630LT-GR/630LT-GR-Nfirmware 2. Set the FTP Server setting of the 630LT-GR/630LT-GR-Nupdated on Step 3. Update the other 630LT-GR/630LT-GR-N 8. PRACTICAL SETUP 8-1. 630LT-GR/630LT-GR-Nsettings ConnectionName: TerminalServerAddress: URL: (for RDP Connection) (for ICA Connection) (for Web Connection) [Network and Dial-upConnections] tab [DHCP Settings] 8-2.Short cut command by keyboard 9. TROUBLESHOOTING 5. The screen has defective pixels (e.g slightly light or dark) 6. Finger prints appear on the screen 10. CLEANING Page 11. SPECIFICATIONS Dimensions 12. REFERENCE 12-1.Attaching an Arm Stand INDEX