12. REFERENCE
12-1. Attaching an Arm Stand
The eClient
NOTE
•Use an arm stand that satisfies the following.
-When using the eClient
-Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting pad.
-Use an arm stand that is able to support an object weighing 8.0 kg.
-A GS approved arm stand.
-Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.
-Use an arm stand remaining that position where it is manually moved.
-Use an arm stand with the ability to tilt the monitor forward and backward.
•Please connect cables after attaching an arm stand.
Setup Procedure
1. Lay the eClient
Arm
(1) (2)
(3)
(4)
(1), (2), (3), (4): Enclosed Screws, M4 x 12 mm
12. REFERENCE 67