2.CONNECTING THE eClient 630LT-GR/630LT-GR-N

This chapter explains how to connect the eClient 630LT-GR/630LT-GR-N to a WTS.

2-1. Setting up the eClient 630LT-GR/630LT-GR-N

Please observe the following cautions when connecting the 630LT-GR/630LT-GR-N.

WARNING

Place the eClient 630LT-GR/630LT-GR-N on a strong, stable surface.

A unit placed on an inadequate surface may fall, resulting in injury

 

or equipment damage. If the unit falls, disconnect the power

 

immediately and have the unit checked by a qualified service

OK

engineer before using it again. Using a unit after it has been

dropped may result in fire or electric shock.

 

Set the unit in an appropriate location.

Not doing so may result in fire, electric shock, or equipment damage.

*Do not place outdoors.

* Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)

* Do not place in a dusty or humid environment.

*Do not place in a location where the steam comes directly on the screen.

*Do not place near heat generating devices or a humidifier.

2-2. Connecting the eClient 630LT-GR/630LT-GR-N

NOTE

•Before connecting the eClient 630LT-GR/630LT-GR-N, confirm the following:

-The eClient 630LT-GR/630LT-GR-N is turned off.

-The WTS is turned on.

•Connect the peripherals to the appropriate connectors of the unit.

2. CONNECTING THE eClient 630LT-GR/630LT-GR-N

9