8. PRACTICAL SETUP

8-1. 630LT-GR/630LT-GR-N settings

By utilizing the DHCP Option function of the DHCP Server, necessary information are supplied by the DHCP Server, and each setting is automatically set every time the 630LT-GR/630LT-GR-N is turned on.

The following information can be obtained by the eClient 630LT-GR/630LT-GR-N.

•WTS/Web Server Connection Settings

•Automatic Software Update

•Security Settings

•Administration Console Setting

NOTE

•For DHCP Option settings, confirm the following:

-The eClient 630LT-GR/630LT-GR-N is connected to the WTS/Web server through built-in LAN or connection with a LAN card

-A DHCP Server is used for obtaining the IP address.

•If you need to change the following settings from the defaults, please change them before using the DHCP option function.

DHCP Server Settings

Please open DHCP settings to configure each DHCP Option as follows.

Items

Contents

Key

Set the value as “EIZO”. (The eClient 630LT-

 

GR/630LT-GR-N will not accept any value but “EIZO”.)

 

 

Server

Type an IP address of the Server installing an update

 

file and a registry file of the eClient 630LT-GR/630LT-

 

GR-N.

 

 

User Name / Password

Type the user name to logon to the FTP Server.

 

Type the password for the user name.

 

 

Automatic Update

Enable/unable an automatic connection.

 

 

File Name

Type the file name to update the software of the

 

eClient 630LT-GR/630LT-GR-N.

 

 

Automatic Connection

Make a Registry File to connect to a WTS / Web

 

server (Refer to the NOTE below for the settings).

 

 

Security Setting

Enable/unable the security settings.

 

 

Administration Console

Type the IP address of the Server where Network

 

Administrator (eClient utility software) is installed.

 

 

56 8. PRACTICAL SETUP