
1.3Specifications
Standard SBC functions
•CPU: Intel® Pentium® MMX CPU 266 MHz
•BIOS: Award 2 Mbit Flash BIOS, supports Plug & Play, APM 1.2, Ethernet boot ROM, and HDD/SCSI/ZIP/CD/Floppy/LS120 boot selection
•Chipset: Intel® 430TX
•L2 cache: 512 KB PB SRAM
•System memory: Two
•PCI IDE interface: Two Enhanced IDE interfaces. Support 4 IDE devices, PIO mode 4 with bus mastering up to 16.7 MB/sec, Ultra DMA mode up to 33 MB/sec
•Floppy disk drive interface: Supports up to two floppy disk drives: 3½ " (720 KB or 1.44 MB) and/or 5¼ " (360 KB or 1.2 MB)
•Parallel port: One parallel port , supports EPP/ECP
•Serial ports: Two RS-232
•Two USB ports
•Watchdog timer: Can generate a system reset or IRQ 11. Software enabled/disabled. Time interval is from 1 ~ 63 seconds. Jumperless with
•SSD (optional): Supports DOC® 2000 up to 144 MB
VGA function (PCA-6359V/VE/F only)
•Controller: C&T 69000 (69030 upon request), supports CRT and
•Display memory: 2/4 MB SDRAM
•Display resolution: Up to 1280 x 1024 @ 256 colors (16 million colors @ 4 MB)
Chapter 1 Hardware Configuration | 5 |