Eizo CG232W 2-6. Setting Black Insertion

2. Adjusting Screen

2-6. Setting Black Insertion

This setting inserts a black screen to suppress blur when showing moving images.

[Procedure]

1. From the <Setup> menu on the Adjustment menu, select <Black Insertion>.

2. Select “On”

Note

• The brightness may drop when set to “On”.

• When set to “On”, the screen may ﬂicker if the DVI/D-SUB input signal exceeds the frame sync

frequency range.

• When set to “On”, the brightness will not change even if set to 45% or more.

Contents

Main Page Notice for this monitor Page Table of Contents 1. Introduction 1-1. Features 1-2. Controls and Functions 1 2 4 5 6 73 1-3. Utility Disk Disk contents and software overview To use ColorNavigator 1-4. Basic Operation and Functions Basic Operation Entering the Adjustment menu Making Adjustments and Settings Exiting the Adjustment menu Functions 2. Adjusting Screen 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies Setting Resolution Windows Vista 2-2. Setting SDI Input Signal Setting Pseudo Interlace Expanding Signal Output Range Setting SDI Signal Adjusting Sharpness Adjusting Display Area Selecting Effective Bits for a 12-Bit Signal 2-3. Displaying Screen Correctly (Analog Input Only) Adjustment Procedure Perform the auto screen adjustment. Prepare the display pattern for the analog display adjustment. Windows Other than Windows Perform the auto size adjustment again with the analog screen adjustment pattern displayed. Adjust by using <Screen> menu in the Adjustment menu Adjust the output signal range (Dynamic Range) of the signal. 2-4. Adjusting Color Simple Adjustment (Switching Color Mode) Selecting Color Mode Color Mode Color Adjustment of the Mode Settings Advanced Adjustments [Adjustment menu] Adjustment Items 2. Adjusting Screen Adjustment Contents Menu Function Descriptions Adjustable range 2-5. Changing Screen Size Ratio Changing Screen Size Ratio for Input Screen Smooth the blurred texts of the enlarged screen. Set the brightness of the black area surrounding the displayed image. 2-6. Setting Black Insertion 3. Setting Monitor 3-1. Setting Power Saving Analog Input [Power Saving System] [Power Resumption Procedure] 3-2. Locking Button Operation [How to lock] [How to unlock] 3-3. Setting Power Indicator 3-4. Setting Button Guide 4.Troubleshooting Page Page 5. Reference 5-1. Attaching an Arm 5-2. Connecting More than Two PCs to the Monitor Connection examples Selecting input signal 5-3. Utilizing USB (Universal Serial Bus) 5-4. Specications Main default settings (factory settings) Dimensions unit: mm (inch) 35 Pin Assignment DVI-D Connector D-Sub mini 15-pin connector USB Port No. Signal Remarks 5-5. Glossary Page 6. Preset Timing For U.S.A, Canada, etc. (rated 100-120 Vac) Only Canadian Notice For Europe, etc. (rated 200-240 Vac) Only