27
Chapter 3 Setting Monitor
3-5. Setting Language [Language]
This function allows you to select a langua ge for the adjustment menu or displaying message.

Selectable languages

English/German/ French/Spanish/Italian/Swedish /Japanese /Simplied Chinese/Traditional Chi nese
Procedure
Choose <Menu Settings> menu from the Adjustme nt menu, and press .
Choose <Language> from the <Menu Sett ings> menu, and press .
Choose a language with or .
Press to exit t he adjustment.
3-6. Setting Range of Frequency [Signal Bandwidth]
Depending upon your operating e nvironment, it may be necessary t o set the frequency that corres ponds
to your graphics board. If you instal l it for the rst time or change environment, set the mon itor.
NOTE
Refer to the manual of the graphics b oard.
These environment desc ribed below can be set regardless of whet her or not the computer is run ning.
Only digital input signals c an be set up.
•
•
•
Procedure
Press to turn off the monitor.
Press holding down at least 2 seconds to tu rn on the monitor.
The Optional Setting s menu appears.
Choose <Signal Baldwidth> from the <Optiona l Settings> menu, and press .
Select “Normal” or “Wide” with or , and press .
Use or to select (or just conrm) the frequency that corresponds to your graph ics board.
Setting Horizontal scanning freque ncy
(kHz) Vertical scanning freq uency
(Hz)
Normal 26~78 59~61
Wide 26~78 23.75~63
Select “Finish” with or .
Press to exit t he Optional Settings.
The Optional Settings menu is closed.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.