Eizo CG243W - page 33

Chapter 5 Troubleshooting

Problems Possible cause and remedy

16. T he monitor connected wi th the USB cable is not

detected. / USB devices co nnected to the monitor

does not work.

Check whether the USB cable is connected c orrectly.

(page 37)

Change the USB port to another one. If the PC or

peripheral devices works correctl y by changing the

USB port, contact your local deal er. (Refer to the

manual of the PC for details.)

Reboot the PC.

If the peripheral devices work correc tly when the PC

and peripheral devices are connected direc tly, please

contact your local dealer.

Check whether the PC and OS are USB compliant.

(For USB compliance of the respective devices,

consult their manufacturers.)

Check the PC’s BIOS setting for USB when using

Windows. (Refer to the manual of the PC for details.)

•

Contents

Main [Location of Caution Statement] Notice for this monitor Cleaning To use the monitor comfortably CONTENTS 6 Chapter 1 Introduction 1-1. Features 1-2. Controls and Functions 8 1-3. Utility Disk 1- 4. Basic Operation and Functions Basic operation of Adjustment menu 1 2 3 Page Functions 12 Chapter 2 Adjusting Screen 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies Digital Input (DVI/DisplayPort) Resolution Display Mode Frequency Dot Clock Setting Resolution Page Page Page Page Page 2-4. Displaying Lower Resolutions 2-5. Conguringmovingimageperformance [Overdrive] Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection [Mode Preset] 3-2. Locking Buttons [Key Lock] 26 3-3. Setting the EIZO Logo Display [Logo] 3-4. Setting Orientation [Orientation] 3-5. Setting Language [Language] Selectable languages 3-6. Setting Range of Frequency [Signal Bandwidth] 28 3-7. Setting the Display Position of the Adjustment Menu [Menu Position] Chapter 4 Power Saving Function 4-1. Setting the Power Saving [Power Save] 30 4-2. Setting Power Indicator [Power Indicator] 4-3. Setting Monitors Automatic Brightness Adjustment [Auto EcoView] Chapter 5 Troubleshooting 32 Page Chapter 6 Reference 6-1. Attaching an Arm [Attachment Procedure] 1 panel surface facing down. Page 6-3. Making Use of USB (Universal Serial Bus) 6-4. Displaying Monitor Information 6-5. Specications Main default settings (factory settings) Page Connector Pin Assignment DVI-I connector DisplayPort connector USB port 6-6. Glossary Page 6-7. Preset Timing About TCO 03 FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice HinweiseHinweise zur Auswahl des richtigen Schwenkarms fr Ihren Monitor