20 Chapter 2 Adjusting Screen
● To adjust the brightnes s [Brightness]
The screen brightness is adjust ed by changing the brightness of the back light (Light source from the LCD
back panel).
Adjustable range: 0 to 100%
Procedure
Choose <Color> from the Adjustment menu, and press .
Choose <Brightness> from the <Color> menu, and p ress .
Adjust the brightness with or .
Press to exit t he adjustment.
NOTE
You can also adjust the brightness using and .
When your feel the image is brig ht even if the brightness is set to 0% , adjust the contrast.
•
•
● To adjust the contrast [Contrast]
The luminance of the screen is adju sted by varying the video signal level.
Adjustable range: 0 to 100%
Procedure
Choose <Color> from the Adjustment menu, and press .
Choose <Contrast> from the <C olor> menu, and press .
Adjust the contrast with or .
Press to exit t he adjustment.
NOTE
In the contrast of 100%, every color g radation is displayed.
When adjusting the monit or, it is recommended to perform t he brightness adjustme nt which may not lose the
gradation charact eristics, prior to the cont rast adjustment.
Perform the contrast adju stment in the following cases.
- When you feel the image is bright even if t he brightness is set to 0%. (Set the cont rast to lower than 100%).
•
•
•
● To adjust the color temper ature [Temperature]
The color temperature can be adju sted. The color temperature is nor mally used to express the hue of
“White” and/or “Black” by a numerical value. The value i s expressed in degrees “K” (Kelvin). In the
same way as the ame temperatur e, the image on the monitor is displayed reddish if the color temperat ure
is low and is bluish if the color temperature is high. T he gain preset values are set for each color
temperature setti ng value.
Adjustable range: Standard, Native, 4000K-10000K (specied by every 500K unit, including 540 0K,
9300K)
Procedure
Choose <Color> from the Adjustment menu, and press .
Choose <Temperature> from the <Color> menu, and pr ess .
Adjust the color temperature with or .
Press to exit t he adjustment.
NOTE
[Gain] allows you to perform more advanced adju stment (See “To adjust the gain value” on page 22).
If you set to [Native], the image is displayed in the pr eset color of the monitor (Gain: 100% for each RGB).
When changing the gai n value, the color temperatur e adjusting range is changed to “ User”.
The default setting for each sRGB/EBU/R EC709/SMPTE-C/DCI mode is set to "St andard", which is the
temperature in con formity with each sta ndard.
•
•
•
•
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.