18 Chapter 2 Adjusting Screen

2-3. Color Adjustment

● To select the display mode (Color Mode)

Color Mode allows you to select easily the adequate mode suitable for the monitor’s application.

Color Mode

Mode Purpose
1-Custom Available for the color settings according to your preference.
2-sRGB Suitable for color matching with sRGB compatible peripherals.
3-EBU Suitable for reproducing the color gamut and gamma as set forth by EBU (European
Broadcasting Union) standards.
4-REC709 Suitable for reproducing the color gamut and gamma as set forth by the ITU-R Rec.
709 standard.
5-SMPTE-C Suitable for reproducing the color gamut and gamma as set forth by SMPTE-C stan-
dards.
6-DCI Suitable for reproducing the color gamut and gamma as set forth by DCI standards.
7-CAL1
8-CAL2
9-CAL3
Displays the screen adjusted by calibration software.
Attention
“CAL” mode can be adjusted only by Calibration Sof tware “ColorNavigator”.
With default settings only one CAL mo de can be selected for every input sign al displayed.
A CAL mode will be chosen by the ColorNavigator in a ccordance with the displayed i nput signal.
Avoid operating any funciton of the monitor wh ile using ColorNavigator.
•
•
•
•
The mode menu
appears.

Procedure

Press .

Mode menu appears at the lower left of the scre en.

The mode among the list is highlighted i n turn each time is pressed.

You can switch the current mode with or while the mode menu is being di splayed.
→Custom←→sRGB←→EBU←→R EC709←→SMPTE-C←→D CI←→CAL1←→CAL2←→CAL3←
NOTE
The Adjustment menu and the Mode menu ca nnot be displayed at the same time.
You can disable a specic mode to be selected. For more infor mation, refer to “3-1 Enabling/D isabling Mode
Selection” (page 25).
•
•

1.

2.