16 Chapter 2 Adjusting Screen
4 Perform advanced adjustments for the following using the <Screen> menu of

the <Analog Adjustment>.

Adjust the clock, phase and position, in this order.
● To eliminate vertical bar s [Clock]
Procedure
Choose <Clock> from the <Analog Adjustment> menu, a nd press .
Adjust the clock with or .
Press slowly so as not to mis s the adjustment point.
Press to exit the adju stment.
When blurring, icker ing or bars appear on the scr een after adjustment, pro ceed to [Phase] to remove ickering
or blurring.
●Removeickeringorblur ring[Phase]
Procedure
Choose <Phase> from the <Analog Adjustment> me nu, and press .
Adjust the phase with or .
Press to exit t he adjustment.
Attention
Flickering or blurri ng may not be eliminated depen ding on your PC or graphics board .•
● To correct screen positi on [Hor.Position] [Ver.Position]
NOTE
Since the number of pixels and the pixel position s are xed on the LCD monitor, only one position is p rovided to
display images correctly. The position a djustment is made to shif t an image to the correct po sition.
•
Procedure
Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press .
Adjust the position with or .
Press to exit t he adjustment.
1.
2.
3.
1.
2.
3.
1.
2.
3.