49
Chapter7Reference
7-6. Preset Timing
The following table shows factory preset analog signal tim ing.
Attention
• Display po sition may be deviated depending on the PC c onnected, which may require s creen adjustment using Sett ing menu.
• If a sign al other than those listed in t he table is input, adjust the screen u sing the Setting menu. However, screen display may
still be incorrect even af ter the adjustment.
• W hen interlace signals are used , the screen cannot be displayed cor rectly even after screen adjust ment using the Setting
menu.
Resolution Applicable
Signals
Frequency Polarity
Dot Clock:
MHz
Horizontal:
kHz Vertical: Hz Horizontal Vertical
640×480 VGA 25.18 31.47 59.94 Negative N egative
640×480 VESA 31.50 37.86 72. 81 Negative Neg ative
640×480 VESA 31.50 37.50 75.00 Negative Negative
720×400 VGATEXT 28.32 31.47 70.0 9 Negati ve Positive
800×600 VESA 36.00 35.16 56. 25 Positive Positive
800×600 VESA 40.00 37.88 60. 32 Positive Positive
800×600 VESA 50.00 48.08 72.19 Positive Positive
800×600 VESA 49.50 46.88 75.0 0 Positive Positive
1024×768 VESA 65.00 48.36 60.0 0 Negative N egative
1024×768 VESA 75.00 56.48 70.07 N egative Negative
1024×768 VESA 78.75 60.02 75.03 Positive Positive
1280×720 CEA-861 74.25 45.00 60.00 Positive Positive
1280×960 VESA 108.00 60.0 0 6 0.00 Positive Positive
1280×1024 VESA 108.00 63. 98 60.02 Positive Positive
1280×1024 VESA 135.00 79.9 8 75.03 Positive Positive