1.SHOW1~8 buttons: To playback Show1-8 in the relative page which you wish to playback
shows in Manual Mode.
2.SHOW Indicators: To indicate the corresponding SHOW activity and state, its indicator will
illuminate in the Manual Mode when the selected show is engaged.
3.PAGE1~4 buttons: To access your desired pages which you wish to playback your desired
shows.
4.PAGE Indicators: Its indicator will illuminate when your desired page is engaged.
5.AUTO/MANUAL button: Access to Auto or Manual function mode.
6.AUTO/MANUAL Indicator: The red indicator indicates the Auto function mode has been engaged
currently and the blue one for the Manual function mode.
7.OFF button: To close the current Show in Manual function mode.
8.OFF Indicator: The desired show has been closed when OFF indicator illuminates.
9.Infrared Sensor: To receive infrared remote signals.
10.USB Port: For communication to PC.
Product Complete View 2
13
4
5
6
8
7
9
10
-2-
1.Auto/Manual mode
Press and hold Auto/Manual button down for more 2 seconds to access Auto or Manual function
mode. The red indicator indicates the Auto function mode is currently engaged and the blue one
illuminates in the Manual function mode.
In Manual mode, user enable to close the current show by pressing and holding OFF button for
more 2 seconds until its indicator illuminates.
In Manual Mode, Shows assignments in Pages may refer to the following table:

Operation on AR-32 Remote

-3-
About AR-32C
With USB port to communication with PC for linking use
Real time triggering your desired shows individually.
Up to 248 files but not over 128M recorded in memory to control DMX signal files.
Ability of up to 32 shows are available to be configured separately by performing AR32
configuration software on PC.
DMX Controlling Mode and Time Trigger Mode and Manual Mode available for playback shows.
Infrared Remote functions (AR-32 Remote included).
Power Failure Memory.
Wall mounting & free standing available.
Main Features
2.Shows are available configured by performing AR-32 configuration software operations on PC
and for further information, please refer to the next accompanying manual of "AR-32 Configuration
Software Operation Guide".
3.User can use AR-32 Remote to control AR-32 System. These functions
of push buttons on the panel of AR-32 Remote are same with ones of your AR-32C.
4.DMX Control Mode
In this mode, SHOWs are available to be controlled and playback by receiving initial DMX address
via AR32 configuration software setting. And user may use DMX values to control the desired
SHOWs. For further information, please refer to the accompanying table:
Architectural Recorder