Electro-Voice R300 manual Quick set-up Receiver, Receiver “Quick Set-up”is complete

01 Quick set-up: Receiver

1.Do not connect the receiver to any other equipment yet!

2.Connect the two Antennas to the receiver.

3.Install the blades into the power supply, plug it into the back of the receiver, and into an outlet.

4.Press the POWER switch. Display will light up.

5.Press and hold the button until CLEARSCAN scrolls across the screen.

6.When CLEARSCAN stops, the receiver will be set to the clearest channel.

7.Turn the receiver off and connect the mixer or other audio system to the receiver XLR Connector or the ¼ inch Line Level Jack.

8.Set the audio mixer or other system input level to minimum.

9.Press the Power switch button in again.

Receiver “Quick Set-up” is complete.

4