EZsync
R300
ClearScan
EZsync
SET
SYNC
e. Press the SYNC button on the receiver to transfer the channel information.
f. The receiver will display SYNC until the data is transferred, then return to the main screen.
g. The transmitter display screen will now show the new channel and frequency.
h. If the channel data was not transferred to the transmitter after 5 seconds, the receiver
will display ERROR. Be certain that the transmitter is On and the EZsync port is facing the receiver and try again.
i. If the data still does not transfer, try new batteries, or move the unit to a shaded area away from direct sunlight before trying again.
9
