Electrohome RV-3798 manual Programming The Remote To Control A Tv

Models: RV-3798

1 60
Download 60 pages 15.98 Kb
Page 28
Image 28
PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE

You can program the remote to control most brands of remote controllable TVs, VCRs and cable boxes. If you have an RCA, GE or ProScan product, you may not need to program the remote at all. Other manufacturer’s brands need to be programmed.

PROGRAMMING THE REMOTE TO

CONTROL A TV

To determine whether you need to program the remote, turn on the TV, point the remote at the TV’s remote sensor and press TV. Then, press the POWER, or CH + or CH button to see if the TV responds to the remote commands. If not, you need to program the remote.

Follow these steps to program your remote to control your TV:

1.Turn on the TV.

2.Look up your TV brand and code number(s) in the code list on the next page or on the code sheet packed with your remote.

3.Press and hold the TV button on the remote.

4.Enter the three-digit code from the code list.

5.Release the TV button, then press POWER to see if the TV responds to the remote commands. If not, try pressing TV then POWER.

6.Repeat steps 3 through 5 using the next code listed for your TV brand until the TV responds to the remote commands.

This remote may not operate all models of the brands shown.

If a battery is removed from the battery compartment of the remote control, all control key functions will return to the original mode.

26

Page 28
Image 28
Electrohome RV-3798 manual Programming The Remote To Control A Tv