Antennas, To listen to the radio | Electrohome RV-3798 specification

APPENDIX A: CONNECTING THE RECEIVER

ANTENNAS

Extend the FM antenna to its full length and adjust it for the best reception.

After you adjust the AM antenna, place it on a

level surface or attach it to a wall using the holes in the antenna’s base.

THIS CONNECTION PROVIDES

•stereo sound from FM stations

•mono sound from AM stations

TO USE THIS CONNECTION, YOU

MUST HAVE

•(1) FM wire antenna (included)

•(1) AM loop antenna (included)

TO CONNECT

1.Connect the cables as shown in the diagram below.

USING THIS CONNECTION

To listen to the radio

1.Turn on the receiver.

2.Select a band (AM/FM).

3.Turn to the desired frequency.

4.Adjust the position of the antenna as needed.

FM Wire Antenna

FM ANT

300Ω BAL

AM ANT

AM Loop Antenna

45

Image 47

Electrohome RV-3798 manual Antennas, To listen to the radio, FM Wire Antenna, AM Loop Antenna

Contents

USER’S Guide Safety Information Table of Contents Table of Contents First Things First First Things First TV only Unpack the ReceiverConnect the Receiver Turn on the Receiver PUT Batteries in the RemotePlug in the Receiver Page Operating the Receiver Operating the Receiver Storing Stations in Memory Tuning the Receiver Using RemoteTuning Auto Tuning To Play a Preset Station Preset Scanning To Balance the Speakers Balancing the Speaker System To Change the Video Source and Swap the Audio Using Swap AudioTo USE Swap Audio Page 3TOUR of the Receiver Tour of the ReceiverButtons and Connections 160W, 5 Channel Front Panel Tour of the Receiver Front Panel Displays Status Indicators Function Displays Mode DisplaysSurround Memory Receiver Controls Remote ControlBasic Controls TV Controls Surround Sound Level ControlsRECEIVER/TUNER Controls VCR Controls Satellite Receiver Controls DVD Player Controls Tape Deck Controls CD Player Controls Laserdisc Player Controls Audio Back Panel 4PROGRAMMING the Remote Programming the Remote Programming the Remote to Control a TV Programming the Remote AOC Remote TV Codes Programming the Remote to Control VCR Remote VCR Codes This remote may not operate all models of the brands shown Programming the Remote to Control AN Audio ComponentAudio Codes Programming the Remote to Control a Cable BOX Remote Controllable Cable BOX Codes Receiver Remote works like DVD Remote Programming the Remote to Control a Laserdisc PlayerLaserdisc Player Codes Programming the Remote to Control a DVD Player Receiver Remote works like RCA DSS Remote Programming the Remote to Control AN RCA Brand DSS ReceiverProgramming the Remote to Control a Satellite Receiver Satellite Receiver CodesPage Things to Know Before Connecting the Components Appendix a Connecting the Receiver AC Outlets Using the Switched OutletUsing the Subwoofer Connections Protect Your Components From Overheating To USE this CONNECTION, YOU should have Using this ConnectionTV and VCR This Connection Provides To watch satellite programming RCA DSS ReceiverTo USE this CONNECTION, YOU Must have To watch TV programs in stereo To play a DVD Diagram BPress DVD to put the receiver in DVD mode Press play DVD Player To play a tape on the second VCR Second VCR To play the camcorder Camcorder or Video Camera To play the laserdisc Laserdisc Player To play a CD Compact Disc Player To play a minidisc Tape Deck or Minidisc PlayerTo play a tape To record a tape AM Loop Antenna FM Wire AntennaAntennas To listen to the radio Speakers Example Appendix B Speaker PlacementSpeaker Placement RECEIVER/TUNER Operation Appendix C TroubleshootingTroubleshooting Guide Remote Control Operation Care and Cleaning Appendix D Care and Cleaning FCC Information Appendix E FCC Information Limited Warranty Appendix F Limited Warranty Equipment Specifications Appendix G Equipment Specifications Appendix G Equipment Specifications Preset Number Band Frequency Appendix H Preset Station List Form Index Symbols PIP VCR Tocom