Speakers | Electrohome RV-3798 specs

APPENDIX A: CONNECTING THE RECEIVER

SPEAKERS

All wires must be securely fastened in their terminals. A loose connection can cause intermittent sound or noise, and can damage your receiver.

If you are using Surround speakers, you must connect both speakers.

MAIN SPEAKERS

•Connect the left main speaker to the MAIN L terminals.

•Connect the right main speaker to the MAIN R terminals.

REAR SPEAKERS

•Connect the left rear speaker to the REAR L terminal.

•Connect the right rear speaker to the REAR R terminal.

•Position the speakers behind you in your TV room. To improve the surround sound effect, you may prefer to set or mount the speakers several feet off the floor.

CENTER SPEAKER

• Connect the center speaker to the CENTER terminal.

CONNECTING SPEAKERS TO THE RECEIVER

1.If necessary, remove the vinyl covering from the ends of the speaker wire and twist the wire.

2.Press down and hold the lever on the speaker terminal.

3.Insert the wire in the hole. Be sure to connect the (+) to

(+) and the (-) to (-). Otherwise, the speakers will not be “in phase”, causing reduction in bass frequencies.

4.Release the lever. Pull gently on the wire to make sure it is secure.

		FRONT SPEAKERS (8	)
		MAIN	CENTER
		L
	1
		AUDIO
	2
SUB WOOFER		R
OUT	(MONO)	R
OUT	(MONO)

SURROUND SPEAKERS (4MIN.)

REAR

L

R

	CONNECTING THE SUBWOOFER
	1. Using a single audio cable, connect the subwoofer to	Speaker Connections
	the SUB WOOFER 1 or 2 connection.	Speaker Connections
	the SUB WOOFER 1 or 2 connection.

46

Image 48

Electrohome RV-3798 manual Speakers

Contents

USER’S Guide Safety Information Table of Contents Table of Contents First Things First First Things First Unpack the Receiver Connect the ReceiverTV only PUT Batteries in the Remote Plug in the ReceiverTurn on the Receiver Page Operating the Receiver Operating the Receiver Tuning the Receiver Using Remote TuningAuto Tuning Storing Stations in Memory Preset Scanning To Play a Preset Station Balancing the Speaker System To Balance the Speakers Using Swap Audio To USE Swap AudioTo Change the Video Source and Swap the Audio Page Tour of the Receiver Buttons and Connections3TOUR of the Receiver Front Panel 160W, 5 Channel Tour of the Receiver Status Indicators Front Panel Displays Mode Displays Surround MemoryFunction Displays Remote Control Basic ControlsReceiver Controls Surround Sound Level Controls RECEIVER/TUNER ControlsTV Controls VCR Controls DVD Player Controls Satellite Receiver Controls CD Player Controls Tape Deck Controls Laserdisc Player Controls Back Panel Audio Programming the Remote 4PROGRAMMING the Remote Programming the Remote Programming the Remote to Control a TV Remote TV Codes AOC Programming the Remote to Control VCR Remote VCR Codes Programming the Remote to Control AN Audio Component Audio CodesThis remote may not operate all models of the brands shown Remote Controllable Cable BOX Codes Programming the Remote to Control a Cable BOX Programming the Remote to Control a Laserdisc Player Laserdisc Player CodesProgramming the Remote to Control a DVD Player Receiver Remote works like DVD Remote Programming the Remote to Control AN RCA Brand DSS Receiver Programming the Remote to Control a Satellite ReceiverSatellite Receiver Codes Receiver Remote works like RCA DSS RemotePage Appendix a Connecting the Receiver Things to Know Before Connecting the Components Using the Switched Outlet Using the Subwoofer ConnectionsProtect Your Components From Overheating AC Outlets Using this Connection TV and VCRThis Connection Provides To USE this CONNECTION, YOU should have RCA DSS Receiver To USE this CONNECTION, YOU Must haveTo watch TV programs in stereo To watch satellite programming Diagram B Press DVD to put the receiver in DVD mode Press playDVD Player To play a DVD Second VCR To play a tape on the second VCR Camcorder or Video Camera To play the camcorder Laserdisc Player To play the laserdisc Compact Disc Player To play a CD Tape Deck or Minidisc Player To play a tapeTo record a tape To play a minidisc FM Wire Antenna AntennasTo listen to the radio AM Loop Antenna Speakers Appendix B Speaker Placement Speaker PlacementExample Appendix C Troubleshooting Troubleshooting GuideRemote Control Operation RECEIVER/TUNER Operation Appendix D Care and Cleaning Care and Cleaning Appendix E FCC Information FCC Information Appendix F Limited Warranty Limited Warranty Appendix G Equipment Specifications Equipment Specifications Appendix G Equipment Specifications Appendix H Preset Station List Form Preset Number Band Frequency Symbols Index PIP VCR Tocom