Electrohome RV-3798 manual Laserdisc Player Codes, Programming The Remote To Control A Dvd Player

Models: RV-3798

1 60
Download 60 pages 15.98 Kb
Page 34
Image 34
LASERDISC PLAYER CODES

PROGRAMMING THE REMOTE

PROGRAMMING THE REMOTE TO CONTROL A LASERDISC PLAYER

You may be able to program your remote to control a laserdisc player. Use the codes shown to the right or on the sheet packed with your remote.

Follow these steps to program your remote to control your laserdisc player:

1.Turn on the laserdisc player.

2.Look up the brand and its code number(s) in the code list.

3.Press and hold the LD•VCR2 button on the remote.

4.Enter the three-digit code from the code list.

5.Release the LD•VCR2 button, then press POWER to see if the laserdisc player responds to the remote commands. If it doesn’t, try pressing LD•VCR2, then POWER again.

6.Repeat steps 3 through 5 using the next code listed for your brand until the laserdisc player responds to the remote commands.

LASERDISC PLAYER CODES

Pioneer

033, 037

ProScan

033, 037

RCA

033, 037

PROGRAMMING THE REMOTE TO CONTROL A

DVD PLAYER

The remote is preprogrammed to control a RCA DVD player. A few of the remote buttons used with a DVD player are shown below. You may want to experiment with other buttons on the remote to see if they work with

your DVD player.

Receiver Remote (works like) DVD Remote

INFO

INFO

GO BACK

GO BACK

CLEAR

CLEAR

MENU SELECT

MENU SELECT

MOVE Arrows

ARROWS

PLAYLIST

PLAYLIST

ENTER

ENTER

This remote may not operate all models of the brands shown.

32

Page 34
Image 34
Electrohome RV-3798 manual Laserdisc Player Codes, Programming The Remote To Control A Dvd Player