Description of the appliance
Position E corresponds to the ENERGY SAVING programme at approx. 67°C for normally soiled laundry, extended washing time (cannot be combined with STAIN and QUICK).
Position COLD means that the machine will perform a cold wash. To be used for extremely delicate items.
ON/OFF button
Press this button to switch the machine on. Press it again to switch the machine off.
Mains-on light
This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again.
START/PAUSE button
This button has three functions:
a)Start
After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.
b)Pause
To interrupt a programme which is running, press the START/PAUSE button: the corresponding pilot light and the light of the programme phase which is running will start to flash.
To restart the programme from the point at which it was interrupted, press the START/PAUSE button again.
c)Empty out water
At the end of a programme which ends with water in the drum (RINSE HOLD option), or after the “soak” programme, press the START/PAUSE button to empty out the water: after the soak programme, the machine will empty only; after RINSE HOLD programmes, the machine will empty and spin.
DELAY START button
The wash programme can be delayed from 1 hour up to a maximum of 19 hours.
The button must be pressed after selecting the programme and before pressing the START/PAUSE button.
The figures indicating the delay appear for about 2 seconds in the dis- play next to the button. The duration of the selected wash programme
13
