Service &Spare Parts
If after carrying out the necessary checks there is still a fault with your
appliance please contact your local AEG Service Force Centre.
In guarantee customers should ensure that the suggested checks in
the “Troubleshooting” section have been made as the engineer will
make a charge if the fault is not a mechanical or electrical break-
down.
Please note that proof of purchase is required for in-guarantee service calls.
Service &Spare Parts
If you require a service engineer or wish to purchase spare parts, con-
tact your local AEG Service Force Centre, by telephoning:

0990 929 929

Help us to help you
Please determine your type of enquiry before telephoning. When you
contact us we need to know:
1.Your name, address and post code.
2.Your telephone number.
3.Clear and concise details of the fault.
-What is the fault?
-When does the fault occur?
-Does the multi-display issue an error-message (Eand a number)?
4.The model, production number and production identification number.
5.Date of purchase.
This information can be found on the rating plate, so you have these
numbers to hand we recommed you write them below.
Prod. No. . . . . . . . . . . . . . . . . . . . . .
F-No. . . . . . . . . . . . . . . . . . . . . . . .
39
Technical data
Height x Width x Depth 82x60x54.5 cm
Depth with door opened 91 cm
Height adjustment ± 13 mm approx.
Net weight 71 kg approx.
Load (depending on programme) 4.5 kg max.
Use domestic
Drum speed during washing max. 55 rpm
Drum speed during spinning 1000/900/700/500 rpm
Water pressure 1 - 10 bar
(=10-100N/cm2= 0.1-1.0Mpa)
This appliance complies with the following EC directives:
- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive
93 / 68 / EEC
- 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.
38
Mod. 1051 VI SENSORTRONIC
Type P6416609
Prod. No 914879005 00
230-240V~ 50Hz 2050 W13 A
F-Nr.
BEAB
Approved