Electrolux 241868904 manual Controls, IQ-TouchTM some models, Setting cooling temperatures

16Controls

IQ-TouchTM(some models)

Your refrigerator is equipped with a Glass Touch Panel user interface display. It is only necessary to touch the glass. There is no need to press with force. There are three dispenser modes:

1Water

2Ice Cubes

3Crushed Ice

A red indicator light will be illuminated above the active mode.

Touch the icon to activate the options below.

Any of the following options that are activated have a red indicator light above the icon.

fast ice	Increases the production of ice
fast freeze	Activates a faster rate for freezing food
dispenser light	On / Off
control lock	Press and hold for three seconds to activate
	and deactivate. This restricts undesired
	changes to the refrigerators settings and
	prevents use of the ice and water dispenser.
vacation mode	Conserves energy by increasing the time between
	automatic defrost. This feature is automatically
	activated during long periods between door open-
	ings. Vacation mode is manually activated when
	the red indicator is lit.
water filter	Touch to display filter condition status.
	Press and hold for three seconds to reset.
air filter	Touch to display filter status. Press and
	hold for three seconds to reset.
temp display	Touch to toggle the freezer and fridge
	temps display on and off.
	Touch and hold temp display to toggle
	display from Fahrenheit to Celsius.
mute sounds	Tones emitted by each keypress can be
	turned off based on user preference. The
	sounds are muted when the red indicator is
	lit. Warning signals will stay active.

factory default	Resets all refrigerator settings such as
	temp, temp display and ring tones to their
	factory default settings.
on off	Press and hold for three seconds to turn off
	the cooling system to clean the refrigera-
	tor. It also turns off all dispenser functions.
	The temperature display will read OFF.

IMPORTANT

Pressing the system off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet.

Setting cooling temperatures

1Touch the glass panel to illuminate the display to the Plus (+) and minus (-) indicators which appear on either side of the displayed temperatures.

2Press the + or – indicator to adjust the temperature to the desired setting.

The temperature display will begin to blink with the first touch. The display times out after 5 seconds and returns to the basic display.