18Storage Features
CAUTION
To avoid injury from breakage, handle tempered glass shelves carefully.
NOTE
Features may vary according to model.
You can easily adjust shelf positions in the freezer and fresh food compartments to suit your needs. The shelves have mounting brackets which attach to slotted supports at the rear of each compartment.
To change the position of a shelf:
1Before adjusting a shelf, remove all food.
2Lift the front edge up.
3Pull the shelf out.
4Replace by inserting the mounting bracket hooks into the desired support slots.
5Lower the shelf and lock into position.
Tighten Spacers to Remove Shelf
1
2 3
1
NOTE
The Cantilever Sliding Glass Shelf has spacers (side screws) on the sides of the brackets to securely hold the shelf in place.
To relocate the shelf to a different location, the spacers must be turned in (clockwise). To secure the shelf in a new location, remember to turn the spacers out (counterclockwise) until they touch the sides of the compartment.
Shelf features
Your refrigerator includes
Sliding shelves can be pulled forward as far as their
Drawers
Your refrigerator includes a variety of storage drawers. These drawers usually are located in fixed positions at the bottom of the fresh food compartment.
Crispers
Crisper drawers are designed for storing fruits, vegetables, and other fresh produce. Before storing items in a crisper:
•Wash items in clear water and remove excess water.
•Wrap any items that have strong odors or high moisture content.
NOTE
Leafy vegetables keep best when stored with the Humidity Control set on Higher Humidity, or in a drawer without a Humidity Control. This keeps incoming air to a minimum and maintains maximum moisture content.
Loosen Spacers
to Stabilize Shelf
Against Liner
