Installation 5
This Use & Care Guide provides general operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps.
Location
•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.
•If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources.
•The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.
•Consider water supply availability for models equipped with an automatic ice maker.
CAUTION
DO NOT install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator.
DO NOT block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator.
Installation
Installation clearances
•Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:
Sides & Top | ³⁄₈ inch |
Back | 1 inch |
NOTE
If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.
Toe Grille Installation and Removal
To install toe grille
1Open both doors. Slide left and right sides of toe grille over lower hinges of refrigerator.
2While pushing toe grille firmly against cabinet, fasten bottom clips of toe grille to cabinet.
3Fasten top clips to cabinet.
4Close the doors. Fasten right and left side clips into groove of bottom hinge.
To remove toe grille
1With both doors closed, unfasten right and left side clips of toe grille from bottom hinge grove.
2Open both doors. Press firmly on top of toe grille until top of toe grille pops off.
3Pull toe grille outward towards your body and off of lower hinges.
