Electrolux 316471113 Setting Oven Controls, Using convection convert, Setting convection convert

	Setting Oven Controls 25
Using convection convert		Setting convection convert

The conv convert option allows you to convert any normal baking recipe using the convection bake feature. The control uses the normal recipe settings and adjusts to a lower temperature for convection baking. Conv convert must be used with CONV BAKE feature.

Benefits of conv bake using conv convert option:

•Superior multiple oven rack performance.

•Some foods cook up 25 to 30% faster, saving time and energy.

•No special pans or bakeware required.

For best results

•Place food items using the recommended rack positions. When baking with a single rack use rack positions 3 or 4. When using 2 racks use rack positions 2 and 5. When using 3 racks use rack positions 2, 3 and 5.

•Cookies and biscuits should be baked on pans with no sides or very low side to allow heated air to circulate around the food.

•Food baked on pans with a dark finish will cook faster.

•When placing multiple food items in the oven allow 2-4” (5-10cm) of space between the food items for proper air circulation.

NOTE

•You may press CANCEL any time when setting the control or during the cooking process.

See the example below to set conv bake, starting immediately with the auto-suggest (default) setting of 350°F (176°C) and adding the conv convert option.

	Example
Step	Press

1. Press UPPER OVEN

2. Press CONV BAKE

3. Press COOK OPTIONS

4. Press CONV CONVERT

5. Press START/enter

Once START is pressed the oven display shows PRE-HEATING. After the oven reaches the converted set temperature, PRE-HEATINGwill turn off and a beep will indicate the oven is ready.

The added conv convert option will automatically lower the set temperature you set from the bake recipe to an adjusted conv bake temperature.

When conv convert is used with cook time the time remaining will flash when the cook time is 75% complete. The control will also beep at regular intervals until baking has finished.

To add or change any cook settings after this feature has started:

•Wake control panel from the sleep mode if necessary.

•Select the UPPER or LOWER oven you wish to change. Make temperature changes using the+ or - keys. Each press of + or - will adjust the temperature by 5° F ( or 2°C).

•If changing cooking times, select thecook time or end time keys needed to make the changes.