Electrolux 316471113 Setting Oven Controls, About convection roast, Setting convection roast

Models: 316471113

1 64
Download 64 pages 63.84 Kb
Page 26
Image 26
26Setting Oven Controls

26Setting Oven Controls

About convection roast

Setting convection roast

 

 

 

How convection roast works

Convection roast is part of the Perfect-Convect³™ system. Convection roast combines a cook cycle with the convection fan and element to rapidly roast meats and poultry. Heated air circulates around the meat from all sides, sealing in juices and flavors. Meats cooked with this feature are crispy brown on the outside while staying moist on the inside. In addition, there is no need to reduce the oven temperature when using convection roast.

Convection roast may be set with the following options:

Probe

Cook time or cook time with end time

Rapid preheat

The following temperature settings apply to convection roast:

Factory auto-start default: 350°F/176°C

Minimum: 300°F / 148°C

Maximum: 550°F / 288°C

Benefits of convection roast:

Superior multiple oven rack performance.

Some foods cook up 25 to 30% faster, saving time and energy.

No special pans or bakeware required.

About convection roast For best results

Preheating is not necessary for most meats and poultry.

Place food items using the recommended rack positions for the type of food being prepared.

When placing multiple food items in the oven allow 2-4” (5-10cm) of space between the food items for proper air circulation.

Be sure to carefully follow your recipe’s temperature and time recommendations or refer to the convection roast chart for additional information -p. 27, Fig. 2.

See example below to set convection roast to start immediately with the auto-suggest (default) setting.

 

Example

 

 

Step

Press

 

 

1. Press UPPER OVEN

2. Press CONV ROAST

3. Press START/enter

Once START is pressed the oven will begin heating. The oven display shows PRE-HEATING.

After the oven reaches set temperature, PRE- HEATING will turn off and a beep will indicate the oven is ready.

Setting convection roast NOTE

You may press CANCEL any time when setting the control or during the cooking process.

To add or change any cook settings after this feature has started:

Wake control panel from the sleep mode if necessary.

Select the UPPER or LOWER oven you wish to change. Make temperature changes using the+ or - keys. Each press of + or - will adjust the temperature by 5° F ( or 2°C).

If changing cooking times, select thecook time or end time keys needed to make the changes.

Page 26
Image 26
Electrolux 316471113 Setting Oven Controls, About convection roast, Setting convection roast, How convection roast works