Installation and Connection Instructions
Connecting the Dishwasher
Water Connection
The dishwasher is fitted with safety devices that prevent the return of wash water into the drinking water system and comply with the appli- cable plumbing regulations.
•The dishwasher should be connected to a cold water supply.
•The dishwasher should not be connected to a hot water supply.
Permitted water pressure
Lowest permitted water pressure: | For a water pressure of less than 2 bar | |
please seek advice from AEG Service | ||
1 bar (=10N/cm2 =100 kPa) | ||
Force. | ||
| ||
Highest permitted water pressure: | In the case of a water pressure greater | |
10 bar (=100 N/cm2 =1 MPa) | than 10 bar, a pressure reduction valve | |
| must be used (available from your | |
| dealer). | |
|
|
| Connect the inlet hose |
1 | The water inlet hose must not be kinked, crushed or entangled when it |
| is being connected up. |
0Connect the threaded hose fitting (DIN 259) on the water inlet hose to a tap with an external thread (¾ inch). Handtighten the threaded hose fitting only.
3 | • In order that access to the tap in the kitchen is not limited by the use |
| of the dishwasher, we recommend the installation of an additional |
tap, or the fitting a two way adapter to the existing tap.
• If you need a longer water inlet hose contact your local AEG Service Force Centre.
31
