Installation and Connection Instructions
Water drain
Drain hose
1 The drain hose must not be kinked, crushed or entangled.
•Connecting the drain hose:
–Maximum permitted height: 1 metre.
–Minimum required height 30 cm above the lower edge of the machine.
Extension hoses
•Extension hoses are available from
AEG Service Force. The internal diameter of the extension hoses
must be 19 mm to ensure that the
function of the appliance is not impeded.
• Hoses may be laid a maximum of
3 metres horizontally; the maxi- 
mum permitted height for the con- 
nection for the drain hose is then
85 cm.
Sink outlet connection
•The outlet of the drain hose (ø 19 mm) fits all commonly available sink outlet spigot types. The outer diameter of the spigot connection must be at least 15 mm.
•The drain hose must be fixed to the sink outlet connection using the hose clamp supplied.
Discharging into a standpipe
When discharging into a standpipe, the upright standpipe should have a minimum, length of 30 cm (12“) from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way that the end of the drain hose cannot be covered with water.
32
