Electrolux 40250 i Operating Instructions, Safety Instructions, Child Safety, General Safety

Models: 40250 i

1 40
Download 40 pages 24.93 Kb
Page 5
Image 5
OPERATING INSTRUCTIONS

Operating Instructions

OPERATING INSTRUCTIONS

1Safety Instructions

The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. Neverthe- less, as a manufacturer we consider it our obligation to make you aware of the following safety information:

Installation, Connection and Placing into Operation

The dishwasher may only be transported upright.

Check the dishwasher for transport damage. Do not in any circum- stances connect an appliance that is damaged. In the case of damage, please contact your retailer.

Before installing the appliance, ensure that the nominal voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.

For information on how to correctly install and connect up your dish- washer, please read the “Installation“ section. Adaptors / connectors and extension cables must not be used.

Child Safety

This appliance is designed to be oprated by adults. Children should not be allowed to tamper with the controls or play with the product.

Keep all packaging away from children.

Keep all detergents in a safe place out of children’s reach.

The water in your dishwasher is not suitable for drinking. If there are still remnants of detergent in the appliance, there is a risk of burns!

When disposing of an old appliance, cut off the power supply cable and remove any door catches, to prevent young children being trapped inside.

General Safety

Repairs to the dishwasher are only to be carried out by qualified serv- ice engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your local AEG Service Force Centre.

5

Page 5
Image 5
Electrolux 40250 i manual Operating Instructions, Safety Instructions, Installation, Connection and Placing into Operation