Operating Instructions

0 1. Set the water softener manually and electronically to the desired water hardness:

 

Manual

 

Electronic

Number

Addition of special salt

 

setting

 

setting

of flashes

 

 

 

 

 

0

 

1

1

 

Do not add special salt.

 

 

 

 

 

 

Addition of special salt

 

0 - 1

 

2-10

2 to 10

via salt container

 

 

 

 

 

 

(factory setting)

3

If the water softener is electronically set at “1” for the purpose of using

 

detergent that includes special salt, the special salt indicator is deacti-

 

vated.

 

 

 

 

 

 

Adding special salt

 

 

 

 

 

If you are using dishwasher detergent and special salt separately, add

 

the special salt:

 

 

 

 

 

 

– Before using the dishwasher for the first time.

 

– When the indicator for special salt J

is illuminated on the control

 

panel.

 

 

 

 

 

0 1.

Open the door, remove the lower

 

 

 

 

 

 

 

 

 

basket.

 

 

 

SALE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Undo the lid on the salt container by

SALT

 

 

 

 

 

 

 

 

SALZ

 

 

 

 

 

 

 

 

 

turning it anticlockwise.

 

 

SEL

 

 

 

 

 

 

 

 

3.When using for the first time: fill the salt container with water.

4.Place the funnel supplied on the con-

tainer opening.

Fill the container with salt through

the funnel; the capacity of the con- tainer is approx. 1.0-1.5 kg depend- ing on the grain size. Do not overfill

the salt container with salt.

3 The water expelled by filling the salt container with salt runs out of the salt container onto the base of the washing compartment. This is not a cause for concern, the water will be pumped out at the start of the next wash programme.

5.Clean any salt remnants on the container opening.

13