Operating Instructions

...there are problems with the operation of the dish- washer.

Symptom

Possible Cause

Solution

 

The door of the dishwasher is

Shut the door.

 

not closed properly.

 

The programme does

Mains plug is not plugged in.

Insert mains plug.

House fuse is defective.

Replace fuse.

not start.

 

 

If dishes are to be washed

 

A start delay is selected.

immediately cancel delay

 

 

start timer.

 

The washing compartment is

Only wash cutlery and dishes

 

made from rust-free stainless

that are suitable for dish-

 

steel. Rust spots in the wash-

washer use.

 

ing compartment are due to

 

Rust spots are visible in

rust particles from external

 

the washing compart-

sources (rust particles from

 

ment.

water pipes, pans, cutlery,

Close the lid of the special

 

etc.). Remove such spots with

 

salt container securely.

 

one of the stainless steel

 

 

cleaners that are generally

 

 

available on the market.

 

There is a whistling

The whistling is not a cause

Use a different brand of

noise during washing.

for concern.

detergent.

 

 

 

...the wash results are not satisfactory.

The dishes are still dirty.

–The wrong wash programme was selected.

–The dishes were loaded is such a way that the wash waster did not reach all items. The baskets for the dishes must not be overloaded.

–The filter in the base of the washing compartment is dirty or incor- rectly positioned.

–Detergent was not used or too little was used.

–In the case of scale deposits on the dishes: The special salt container is empty or the water softener is incorrectly adjusted.

–The drain hose is incorrectly laid.

The dishes are wet and dull.

–Rinse aid was not used.

–The rinse aid container is empty.

34