Operating Instructions

What to do, if ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

...Error messages are displayed.

If your appliance is equipped with an optical floor signal, in the event of an error a dot-shaped optical signal will flash on the floor.

3

Errors will only be indicated acoustically if the acoustic signal has been

 

activated.

 

 

 

If, as listed in the table below, any of the indicators in the control panel

 

or the display panel are flashing or are illuminated, and/or if an acous-

 

tic signal can be heard, you can probably rectify the fault yourself.

 

 

 

 

 

Malfunction

Possible cause

Remedy

 

 

The tap is blocked or

Clean tap

 

 

furred with lime-scale

 

 

 

 

 

The tap is turned off.

Turn the tap on.

 

 

The filter (where

 

 

 

present) in the

Clean the filter in the

 

One continuously repeated

threaded hose fitting at

 

warning tone can be heard,

the water inlet valve is

threaded hose fitting.

 

 

 

the cycle indicator for the

blocked.

 

 

selected cycle is flashing,

 

Press the button for the

 

the end cycle indicator is

 

 

 

commenced dishwashing

 

flashing once repeatedly:

 

 

Filters in the base of

cycle;

 

There is no water running

 

then cancel the dishwashing

 

into the dishwasher.

the washing compart-

 

cycle (see chapter: Starting a

 

 

ment are blocked.

 

 

dishwashing cycle);

 

 

 

 

 

 

Clean out the filters. (See

 

 

 

chapter: Cleaning the filters)

 

 

 

 

 

 

The water inlet hose has

Check hose installation.

 

 

not been correctly laid.

 

32