Electrolux 44070 VI Starting a dishwashing cycle, cycle, Changing a dishwashing cycle, Changing/interrupting/cancelling a dishwashing

Operating Instructions

Starting a dishwashing cycle

0 1. Check that the dishes and cutlery are stacked in the dishwasher in such a way that the spray arms are free to rotate.

2.Turn on the tap fully.

3.Press the ON/OFF button.

The LED indicators for all programme buttons (and the button for the delay start timer if present) light up. The LED indicators and any option buttons that are present only light up if they are activated.

4.Press the relevant button for the cycle required (see “Programme Table”).

The cycle display will become illuminated.

5.Close the dishwasher door. The dishwashing cycle will begin.

3	If an acoustic error message can be heard after the cycle has begun,
	please read the section “What to do if ...”.
	Changing/interrupting/cancelling a dishwashing
	cycle
3	Only change or interrupt a dishwashing cycle that is in progress if it is
	absolutely necessary. After the appliance has been closed again, the air
	that has entered will be heated significantly and expand. As a result,
	water may collect in the base of the appliance and trigger the anti-
	flood system.
	Changing a dishwashing cycle
3	If you would like to change the dishwashing cycle before closing the
	dishwasher door, briefly press the button for the new dishwashing
	cycle.
	If you would like to change the dishwashing cycle after the cycle has
	commenced, proceed as follows:
1	Hot steam may escape when the dishwasher door is opened. There is a
	risk of scalding! Carefully open the door of the dishwasher.
0 1.	Open the door of the dishwasher. The dishwashing cycle will stop.

2.Press the button for the new dishwashing cycle and hold it down. First, the indicator for the dishwashing cycle that is currently running will flash.

After several seconds only the indicator for the new dishwashing cycle will be flashing.

28