| Operating Instructions |
| Interrupting the wash programme |
| (only in emergencies) |
3 | Interrupt a wash programme in progress only when it is absolutely |
| necessary to do so. For safety reasons the door of the dishwasher is |
| only unlocked at the end of the wash programme. Therefore, when the |
| programme is running, increased force is necessary to open the door to |
| overcome the locking mechanism. If the door is frequently opened |
| when a wash programme is in progress, the door lock is subject to addi- |
| tional wear. |
| In addition, when the appliance is closed again, the air that has entered |
| the appliance is heated and expands significantly. As result water may |
| penetrate into the base of the appliance and trigger the leak preven- |
| tion system. |
1 | Hot steam may escape from the appliance when opening the door. |
| Open the door carefully. |
0 1. Open the door of the dishwasher. Since the door is locked when the wash programme is running, more force is needed to open the door.
2.Rectify the reason for opening the appliance.
3.Close the door, again more force than normal will be required. The selected programme will then continue.
Load Sensing – Sensor Logic
If a wash programme is started even though there are only a few dishes in the upper and/or lower rack, an intelligent electronic system adjusts the amount of water and the duration of the wash programme to the number of dishes. By this means it is possible to wash only a few dishes quickly and economically. At half load (6 place settings), up to 2 litres of water and 0.2 kWh of electricity are saved.
23