Operating Instructions
What to do, if ...
Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.
...warning tones indicating a fault in the dishwasher.
•If one or two repetitive warning tones can be heard after the start of a programme, they are indicate of a fault in the dishwasher that you can probably rectify yourself. The door of the dishwasher is automat- ically unlocked when the tones sound.
After rectifying the fault, press the button for the wash programme that has been started and close the door of the dishwasher. The wash programme should continue.
If the same warning tone is heard again, please contact AEG Service Force.
•If more than two repetitive warning tones are heard after the pro- gramme start, please contact AEG Service Force. The Service Centre will need to know the number of tones and whether indicators on the control and display field are flashing.
Symptom | Possible Cause | Solution | |
| Tap is closed. | Open tap. | |
1 warning tone that is con- | The filter (where | Clean the filter in the | |
tinuously repeated can be | present) in the threaded | ||
heard and the programme | threaded hose fitting. | ||
hose fitting is blocked. | |||
indicator on the display and |
| ||
|
| ||
control panel are flashing. | The water inlet hose is | Check hose installation. | |
| not correctly laid. | ||
|
| ||
2 warning tones that are | The sink outlet is | Clean the sink outlet. | |
blocked. | |||
| |||
continuously repeated can | The water drain hose is |
| |
be heard. | Check hose installation. | ||
| not correctly laid. | ||
|
| ||
3 warning tones that are | The leak prevention sys- | Close the tap and contact | |
continuously repeated can | |||
tem has been triggered. | AEG Service Force. | ||
be heard. | |||
|
| ||
|
|
|
26