➡
◆Installing the Batteries in the Handset
• If the rechargeable batteries are not inserted correctly, the handset will not work.
Chapter 1
◆Battery Charge
At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for approximately 10 hours before initial use. During charging, the battery icon is as shown.
Full | Low |
| Flashing |
◆Battery Strength
You can check the present battery | Battery strength | Fully charged | Medium | Low | No power | ||||||
Battery icon |
| Ò |
|
| Ú |
| Û |
| Û | (Flashing) | |
strength on the display. |
|
|
|
|
| ||||||
| |||||||||||
|
|
|
|
|
|
|
|
|
| ||
◆Recharge
When “Û” flashes or the unit beeps every 15 seconds, recharge the batteries.
◆Battery Information
After your batteries are fully charged:
Operation |
| |
|
|
|
While in use (Talk) | Up to about 20 hours | Up to about 12 hours (based on 800m/A per hour) |
|
|
|
While not in use (Standby) | Up to about 160 hours | Up to about 100 hours |
|
|
|
•Battery life may vary depending on usage conditions, such as:
–when viewing the Caller ID Caller List,
–when the handset is in the speakerphone mode and
–ambient temperature.
•Clean the handset charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the batteries may not charge properly.
•If the batteries are fully charged, you do not have to place the handset on the base unit until “Û” flashes. This will maximise the battery life.
•The batteries cannot be overcharged.
7
