➡
◆Auto Redial
When speakerphone is turned on and redial used, the number is dialled automatically. If
the number is busy, the unit goes into auto redial mode. The unit automatically repeats the
call (max. 12 times) until the called party answers the call.
Make sure that the unit is in the standby mode.
1.Z%.
2.ZX.
•The last redial number is displayed and dialled to outside line.
• The Mic on handset is mute until a ‘busy tone’or ‘ring back tone’
is detected.
• If a busy tone is detected, the unit releases the outside line and returns to the standby
mode. The speakerphone button LED flashes. After 40 seconds, the speakerphone
LED turns steady on and the number is redialled automatically.
•If a ring back tone is detected, the mic is not mute, “–Muting–” is cleared from the 1st
line, the unit finishes Auto Redial and display goes to conversation.
• If the user presses %during Auto Redial, redial is cancelled and unit returns to
speakerphone.
•If a busy tone or ring back tone is not detected within 30 seconds, the unit finishes
Auto Redial procedure and unit returns to standby.
◆To Select the Receiver Volume or Speaker Volume
during conversation
3 levels are available during conversation or when using the headset (high, medium or
low).
6 levels are available in the speakerphone mode.
1. During conversation, ZSor Uto select level
S= receiver volume up
U= receiver volume down.
• After a few seconds, the display returns to the length of call.
14
–Muting–
0223456789
ÎÏÔÍÁ Ò
Receiver Volume
LOW HIGH
ASetting Base
ÎÏÔÍÁ Ò
KX-TCD705_HongKong 12/7/01 2:29 pm Page 14