1.Pull drawer containing condensate tank
out all the way.
2. Pull out condensate tank’s outlet connections and pour condensate out into basin or other suitable container.
3. Slide outlet connections in and refit condensate tank.
If the programme has been interrupted as a result of the conden-
sate tank being full:
Press the START/PAUSE button to continue the drying cycle.
3 The condensate tank has a volume of approx. 4 litres. This is sufficient for around 6kg of laundry which has previously been spun at 800 revo- lutions/minute.
3 The condensate can be used as distilled water, e.g. for steam ironing. However first filter the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
Cleaning heat exchanger
If the HEAT EXCHANGER display is illuminated, the heat exchanger needs to be cleaned.
1 Caution! Operating when the heat exchanger is clogged with lint can damage the dryer. This also increases energy consumption.
1.Open loading door
2. Open base door. To do this, press the release button on the bottom of the loading opening and open the door to the left.
3.Remove lint from the inside of the door and the heat exchange cham-
ber.
17